Section 2: General operation
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
2-12
077114601 / March 2019
Soft key area 3 for the power supply function
Soft key area 3 for the power supply function contains the settings shown in the following figure and
explained in the table. To change a setting, press the soft key to open a settings window. After
configuration, close the window by pressing the
ENTER
or
EXIT
key.
Figure 13: Soft key area 3
Setting
Description
List
Configure the list function.
Enable
Run a specified list;
On
or
Off
.
Number
Specify the list number. The default setting for list number is
Demo
. You can
run a predefined list. For more information about Demo, see
Information menu for the power supply function
(on page 2-32).
Hold Time
Set the list running time as
Point
or
Time
.
End Zero
Enable or disable setting the voltage to 0 V after the list operation has ended.
Mode
Select
Sweep
or
Step
list mode and specify the list cycle.
Graph
View the data plot.
Data Sheet
View the data in a spreadsheet format.
Buffer
Clear the data buffer.
Next
Switch to home screen 1.
