Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Section 2: General operation
077114601 / March 2019
2-17
Soft-key areas for the battery simulator function
The 2281S display has multiple soft-key areas that you can access by pressing the
Next
soft key.
The soft-key areas give you front-panel access to some instrument settings so that you can change,
enable, or disable them quickly. The following topics describe the soft-key areas for the battery
simulator function.
Soft key area 1 for the battery simulator function
Soft-key area 1 contains the settings shown in the following figure and explained in the table. To
change a setting, press the soft key to open a setting window. After configuration, close the window
by pressing the
ENTER
or
EXIT
key.
Figure 19: Soft key area 1 for battery simulation
Setting
Description
Model
Choose the model of the battery.
Method
Choose the mode of the simulation; you can choose between
Dynamic
and
Static
.
Voc
Set the initial open-circuit voltage for the battery.
SOC
Set the initial battery capacity in percentage.
Next
Switch to home screen 2.
If you use the navigation control to adjust the voltage and current settings, the values are applied to
the instrument immediately when the output is on.
