Tektronix Keithley 2281 Series Скачать руководство пользователя страница 124

Страница: 124 / 578

Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual

Section 2: General operation

077114601 / March 2019

2-101

Overvoltage protection

Overvoltage protection restricts the maximum voltage level that the instrument can source. This

protects the device under test (DUT) from high voltage levels.

For example, if a sense lead is disconnected or broken during a 4-wire sense measurement, the

instrument can interpret the missing sense lead as a decrease in voltage and respond by increasing

the source output. If overvoltage protection is set, the sourced output is not allowed to exceed the

overvoltage protection limit.

When overvoltage protection is set and the sourced voltage exceeds the setting:

The output is turned off.

On the home screen, an indicator to the right of the voltage displays

OVP

An error is generated. For more information, refer to

Overprotection error

(on page 2-103).

When overvoltage protection is used in a test sequence, it should be set before turning the source on.

Even with the overvoltage protection set to the lowest value, never touch anything connected

to the terminals of the 2281S when the output is on. Always assume that a hazardous voltage

(greater than 30 V RMS) is present when the output is on. To prevent damage to the DUT or

external circuitry, do not set the voltage source to levels that exceed the value that is set for

overvoltage protection.

Setting overvoltage protection limits

Overvoltage protection has a default value of the maximum output.

To set overvoltage protection using the front panel:

1. Press the

MENU

key.

2. Under Source, select

Protect

3. Select

OVP

and set the limit.

4. Select

HOME

to return to the operating display.

To set overvoltage protection using SCPI commands:

To set the overvoltage limit for the voltage source to 20 V, send the command:

:VOLTage:PROTection 20

See the command description for

[:SOURce[n]]:<function>:PROTection[:LEVel]

(on page 7-129) for

the full list of options.

Содержание Keithley 2281 Series



































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Keithley 2281 Series

Отзывы:

Похожие инструкции для Keithley 2281 Series

Бренды по названию

Популярные бренды

Tektronix Keithley 2281 Series, Справочное руководство

Результаты поиска

Содержание Keithley 2281 Series

Отзывы:

Похожие инструкции для Keithley 2281 Series

Бренды по названию

Популярные бренды