Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
Section 7: SCPI command reference
077114601 / March 2019
7-69
The options for
<bufferElements>
are described in the following table.
Options
Description
Example
VOLTage
The voltage value
+4.01
CURRent
The current value
+8.034562E-03
SOC
Value of State of charge, only available in SIMulator mode
95.50
RESistance
Internal resistance value in SIMulator mode; ECR value in
TEST mode.
1.52
AH
Actual A-H data only available in TEST mode.
+1.040727E-4
UNIT
Unit for measurement reading, source value, time stamp
and reading number.
‘mA’, ‘s’ and ‘RDNG#’
MODE
Output state
CC,CV or OFF
DATE
The date when the data was generated
07/01/2013
TIME
The time when the data was generated
19:21:36.2553
TSTamp
The date and time when the data was generated
07/01/2013 19:21:36.2553
RELative
The relative time when the data was generated
+4.00
RSTamp
The relative stamp time when the data was generated
00:00:10.0126
RNUMber
Reading number indicates the index that the point in trace
buffer.
0001
If you include SOC in
<bufferElements>
in battery test or AH measurement in battery simulator,
error 709, "buffer elements not supported in this mode," occurs.
Example
:BATT:TRAC:DATA? "SOC,UNIT,REL"
The values of SOC, UNIT, and REL are returned.
Also see
(on page 7-23)
:BATTery[n]:DATA:DATA:SELected?
(on page 7-25)
:BATTery[n]:TRACe:DATA:SELected?
(on page 7-70)