Section 2: General operation
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
2-110
077114601 / March 2019
The instrument also responds to other types of resets. These resets include:
Password reset:
This resets the instrument password to its default value. You can reset the
password by pressing the
MENU
key and under System, selecting
Settings > System Password
.
The default password is
admin
(on page 3-1).
LAN reset:
This resets the LAN settings and the instrument password to the system default
values. You can reset the password by pressing the
MENU
key, selecting Communication (under
System), selecting LXI LCI, and pressing the
ENTER
key.
Status preset:
This resets all bits in the status model. If you are using the SCPI command set,
refer to
(on page 7-156).
Reset the instrument
You can reset many of the instrument settings to their default values. For details about what gets
(on page 2-110). Default values are also listed in the individual
command descriptions.
To reset the instrument using the front panel:
1. Press the
MENU
key.
2. Under system, select
Manage
.
3. Select
System Reset
.
4. The commands are reset and a confirmation message is displayed.
To reset the instrument using SCPI commands:
Send the command:
:SYSTem:PRESet
Reset default values
When you turn instrument power on and off or send a reset command, many of the settings in the
instrument are reset to their default values.
The settings that are affected are listed in the following tables. The tables show SCPI and front-panel
values for each setting. They are grouped by function and sorted alphabetically in each group by the
name of the SCPI command.
