Section 3: Functions and features
Model 2281S-20-6 DC Power Supply and Battery Simulator Reference Manual
3-40
077114601 / March 2019
Configuring a list
To set up a list from the front panel, select options from the SOURCE LIST screen.
To configure a list on the front panel:
1. Press the
Menu
key.
2. Under Source, highlight the
List
icon using either the navigation control or the soft keys.
3. Press the
ENTER
key. The SOURCE LIST screen is displayed.
Figure 87: Source List screen
4. Select the button next to
List
and press the
ENTER
key. The List Location screen is displayed.
5. Select a list location where you want to save the list and press the
ENTER
key. The 2281S
supports up to 9 list locations. You can also import a predefined list from an external USB flash
drive. For details, refer to
Importing a list from an external USB flash drive
(on page 3-42).
6. Use the
Insert
or
Copy
button to increase the points in the list. For details, refer to
copying points from the front panel
(on page 3-41). Use the
Delete
button to delete the points.
Deleting points from the front panel
(on page 3-41).
You can use the
Insert
button to add one point with default settings before each specified point. The
default settings are:
0.000
V,
0.100
A,
0.100
s. You can also use the
Copy
button to copy the
selected settings for the point and insert a new point with the same settings before each point.
For an empty list, you can add the first point by selecting point 1 and pressing the
ENTER
key. The
first point is configured to the default settings.
