900-00280-01-001 Rev A
1
Mojave
™
ESS Power Supply
Installation Instructions
Purpose and Scope
These instructions detail how to install an AC-to-DC power supply in the Mojave™ Energy
Storage System (ESS). This power supply will enable firmware updates to the ESS battery.
The process for firmware updates is specified elsewhere and is not included here.
These instructions require familiarity with both the Mojave™ inverter and the ESS battery.
For more information, refer to the
Mojave™ Inverter/Charger Quick Start Guide
and the
Mojave™ ESS Operator’s Manual
.
CAUTION: Hazard to Equipment
Make certain to remove all power to the Mojave™ ESS and any other equipment.
Follow all instructions included in this document.
CAUTION: Equipment Shutdown
This power supply must be installed before performing firmware updates to the ESS battery.
Failure to install it will result in complete shutdown of both the Mojave™ inverter and ESS battery.
Mojave
™
Chassis
OutBack Power has manufactured Mojave™ inverters with two different chassis. These can
be identified by the conduit knockout pattern. Follow the appropriate installation instructions.
Figure 1
Mojave
™
chassis types
If the knockouts appear in
the pattern shown in
1
,
follow the instructions on
page 2.
1
If the knockouts appear in
the pattern shown in
2
,
follow the instructions on
page 4.
2
