Siemens SINAMICS G120X, Руководство по эксплуатации

Страница: 870 / 1148

Note
The switchover to daylight saving time only effects the RTC and DTC parameters (p8400 ... p8433).
When displaying the fault time and alarm time, the switchover to daylight saving time is not taken into account.
There must be at least two months between the start and end of daylight saving time.
For index 0:
0: daylight saving time switchover deactivated
1 ... 3: time difference
For indices 1 and 5:
1 = January, ... , 12 = December
For indices 2 and 6:
1 = from the 1st to the 7th of the month
2 = from the 8th to the 14th of the month
3 = from the 15th to the 21st of the month
4 = from the 22nd to the 28th of the month
6 = the last 7 days of the month
For indices 3 and 7:
1 = Monday, ... , 7 = Sunday
r8403 RTC actual daylight saving time difference / RTC act DST
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: - Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
- Max:
- Factory setting:
-
Description: Displays the actual time difference in hours for the daylight saving time
Note
The value is 0, if daylight saving time has not been defined using p8402.
If it is presently daylight saving time according to what is defined in p8402, then the parameter indicates the time
difference between daylight saving time and normal time (p8402[0]).
r8404 RTC weekday / RTC weekday
Access level: 3 Calculated: - Data type: Integer16
Can be changed: - Scaling: - Dynamic index: -
Unit group: - Unit selection: - Function diagram: -
Min:
1 Max:
7 Factory setting:
-
Description: Displays the weekday on the real-time clock.
Value: 1: Monday
2: Tuesday
3: Wednesday
4: Thursday
5: Friday
6: Saturday
7: Sunday
Note
RTC: Real-time clock
Parameters
7.2 Parameter list
SINAMICS G120X converter
868
Operating Instructions, 06/2019, FW V1.01, A5E44751209B AC