Beckman Coulter UniCel DxC 600, Инструкция по эксплуатации

Страница: 198 / 498

A13914AF
6-8
Sample Programming and Processing
Sample Programming and Processing
1
Select
Samples
from the menu bar.
2
Identify samples using the list below:
If the sample has a readable bar code:
•
Type the Sample ID.
•
If previous programming appears, it may be necessary to clear it.
•
If no previous program appears, go to Step 3.
If the sample has no bar code or bar code can not be read:
•
Type the Sample ID.
•
Type the numbers in the
Rack
and
Pos
fields.
3
If the sample is stat, select the
STAT
check box.
4
Select
Sample Type
from the pull-down menu.
NOTE
The sample type for UDR must be serum, plasma, CSF or urine. Do not use any other sample type.
5
Select
Sample Comment
from the pull-down menu.
6
To enter Demographics, select
Demog F2
. Type the information provided and select
Next F10
to
return to the
Program Sample
screen.
7
Select each chemistry and/or select a panel. To access additional chemistries, use the up and
down arrows to move to other pages.
8
Select
Next F10
.
9
To program additional samples, repeat Steps 2-10.
10
Place the samples into assigned rack positions.