Beckman Coulter UniCel DxC 600, Инструкция по эксплуатации

Страница: 140 / 498

A13914AF
4-8
Reagent Load/Calibration
Reagent Load
7
Use the hand-held bar code reader to scan the reagent bar code of each new bottle. The system
"beeps" to indicate a successful bar code read.
Check the monitor to verify that the reagent data shows. When the bar code is scanned, the
reagent screen updates with current reagent information. The reagent may be loaded manually,
if the bar code cannot be scanned. If the bar code can not be scanned, manually clear the
reagent by selecting
Clear F1
, type new information.
8
Close the door and select
Done F10
. For loaded chemistries, continue to Step 9.
9
For loaded chemistries, calibrate and run QC before processing patient samples.
CC Reagents Information
DxC Systems use the cartridge bar code to identify and record data regarding reagent name, lot
number, expiration date (for example, 200601), and serial number of the cartridge. Refer to
Figure 4.7 and Figure 4.8 . Additionally, the system retains calibration status of loaded and unloaded
cartridges.
•
Reagents can be loaded while the system is Running or in Standby .
•
Check reagent box or Reagent Preparation Card for reagent preparation instructions.
•
Caps must be removed from the cartridge before loading.
• Check cartridges for bubbles in the reagent compartments before loading. Use an applicator
stick to remove bubbles.
Figure 4.7
CC Reagent Information
1.
Reagent Name
2.
Lot Number
3.
Expiration Date
4.
Serial Number
A016485P.EPS
1
3
4
2