Beckman Coulter UniCel DxC 600, Инструкция по эксплуатации

Страница: 210 / 498

A13914AF
7-6
Results Recall
Edit Critical Rerun Result
Edit Critical Rerun Result
Introduction
When a sample is rerun, the two results are shown in the
Recall Results
screen. The first result is
always listed at the top and the rerun result is listed under the first result. The operator can delete
one of the results and keep the other result. Only one of the two results can be deleted.
For Critical Rerun Result with DAT samples, printed results have a positive or negative flag for all
results. On the screen, the first result is flagged positive or negative. The second (rerun) result,
however, has no interpretation; only a rate and a critical rerun remark are shown. Use the printed
report to compare the two interpretations. If they are both positive or both negative, delete the
second result.
Delete Critical Rerun Result
Follow the steps below to delete one of the two results of a sample which was rerun with Critical
Rerun Result.
1
From the
Recall Results By
dialog box, select the results to be viewed, as previously described in
this chapter.
2
Select
Results F1
to view requested samples.
3
Press
(
Page Up
)
or
(
Page Down
)
to view additional pages of the same sample.
4
Locate the desired sample that has two results. Select one of its results to delete.
5
Select
Edit F4
to delete the selected result.
6
Select
Yes
to delete the result.
OR
Select
No
to not delete the result and return to the
Recall Results
dialog box.