Beckman Coulter UniCel DxC 600, Инструкция по эксплуатации

Страница: 245 / 498

A13914AF
9-9
Maintenance
Weekly Maintenance
9
8
Fill the 2 mL sample cups with diluted Clenz Solution, Sodium Hypochlorite and Saline and
place into the correct rack and positions identified in step 7.
9
Load the sample rack on the system, and press the
RUN
button on the instrument.
NOTE.
Ignore the results for these samples.
10
Calibrate the electrolytes and run controls.
11
Remove the CCWA wash solution cartridge.
•
Replace the cap on the cartridge and store at room temperature to use at the next
maintenance interval.
•
Discard the cartridge after four months.
12
Record the maintenance procedure in the
Action Log
.
•
Select
Utils
from the menu bar
•
Select
2. Maintenance
.
•
Select
Action [F1]
.
•
Record the Twice Weekly maintenance and press
Save
.
13
To remove the yellow highlight from the maintenance icon, select the
Initial and Date
checkbox
for both the
Clean Flow Cell and Cups
and the
CC Probe Cleaning
procedures under the weekly
maintenance tab in the electronic maintenance log. To complete the entry of this information,
select the
Initial and Date
button. When a procedure has had initials and date entered, the
maintenance counter resets for the appropriate time interval.
NOTE.
Entering of initials and date for the Clean Flow Cell and Cups and CC Probe Cleaning will have to
be done on a weekly basis to ensure that the yellow highlight does not remain lit for the tasks which
are being replaced by the Twice Weekly procedure.
Weekly Maintenance
Check Reagent Levels
Clean Total Protein and Albumin Cup Modules (DxC 800 Only)
Clean Probes (Exterior)