Beckman Coulter UniCel DxC 600, Инструкция по эксплуатации

Страница: 394 / 498

A13914AF
11-10
Utilities
Event Log
Specify the Date/Time
It is possible to select a date and time range to show only data from that time period. This
specification can be used alone to view all events for the specified date and time range or can be
combined with Class selections to view only those events which occurred for selected classes during
the specified date and time range.
When selecting a date and time the following rules apply:
•
if a
From
date is entered but no
End
date, only data for that date is retrieved.
•
if a
To
date is specified, a
From
date is required.
•
if hours are entered, but no minutes, 00 minutes is used.
After selecting the desired Event Classes, follow the steps below to specify the desired date and time
period.
1
Select
Time
from the
Event Log
dialog box.
2
Type desired time period. Press
(
Tab
)
to advance the cursor to each field.
3
Select
OK
to accept the time period.
OR
Select
Cancel
to exit the
Date/Time
dialog box without specifying a date/time period.
4
Select
Display
to view selected information. When finished viewing the information, select
Close
.
5
If desired, select
Copy to Disk
from the
Display Events
dialog box.
OR
Select
Print
. This will print the entire selection, not just the page currently shown.