Beckman Coulter UniCel DxC 600, Инструкция по эксплуатации

Страница: 374 / 498

A13914AF
10-10
System Status and Commands
Pause
When to Use Pause
Use Pause when the system must be interrupted but there is not an immediate need to stop the
samples in process. Correct uses of
Pause
include:
•
When maintenance is needed but the system is already running.
•
When a rack needs to be removed from the sample carousel but is not needed immediately or
to avoid wasting reagent.
When NOT to Use Pause
Do not use Pause when there is danger involved or when the situation can be handled with another
function.
Pause
1
Select
Instr Cmd
from the menu bar.
2
Select
2 Pause
.
3
To pause the related part of the instrument, from the
Pause
dialog box, select:
•
1 MC Only
,
•
2 CC Only
OR
•
3 Both MC and CC
.
OR
Table 10.3 Alternatives Instead of Pause for Some Situations
Situation... Instead of Pause...
Imminent danger to a person or the
instrument. Press the STOP button or turn off power.
Reagent needs to be loaded while the
system is running. Perform a reagent load as usual and the system automatically
interrupts reagent additions to allow the reagent load to continue.
Upon completion of the reagent load, the system will resume
running samples.
Sample on the sample carousel is
needed immediately. From the Main screen select the rack with the sample needed
and select Unload F2 . Note that any tests that have been started
for the samples in the rack that have not yet had sample added
will be aborted. The rack, however, will be available within
approximately 40 seconds.