Omron R6YXG500, Installation Manual

Page: 181 / 330

3
Robot settings
3-5
2.3 Absolute reset procedures
2.3.1 Sensor method (X-axis, Y-axis and R-axis) with YRCX controller
WARning
SeriouS injury might occur from phySical contact with the robot during operation. never enter
within the robot movement range during abSolute reSet.
the operation procedure using the pbeX is described below.
nOTE
• When pressing the key on the execution confirmation screen, the execution of the absolute reset is canceled.
• For details about how to operate the robot controller, see the "OMRON Robot Controller User's Manual".
1
Turn on the controller.
Check that no one is inside the safety enclosure, and
then turn on the controller.
2
Place a sign indicating the robot is
being adjusted.
Place a sign indicating the robot is being adjusted, to
keep others from operating the controller or operation
panel.
3
Display the "ORIGIN RTN (TRQ/
SENS)" screen on the PEBX
(operation → return-to-origin).
;D[LV
<D[LV
5D[LV
$EVROXWHUHVHWPRGHVFUHHQ
6WHS
4
Select an axis for absolute reset.
(X-axis: 1, Y-axis: 2, R-axis: 4)
use the cursor keys ( / ) to select an axis
number or all axes (ALL) whose absolute reset is
performed.
The execution confirmation screen will pop up.
CAUTiOn
The Z-axis of the stroke end method first rises during the
absolute reset of all axes (default setting). Be careful that
your fingers do not get pinched or crushed by any sudden
movement.
5
Check the axis position.
Check that the axis whose absolute reset is performed
is located at a position on the plus side from the
origin. (See also the figure on the right.)
If not located on the plus side, move the target axis
to the plus side using the JOG operation beforehand.
$EVROXWHUHVHWSRVVLEOHUDQJH
6WHS
5HWXUQWRRULJLQLV
LPSRVVLEOHIURPWKLVDUHD
2ULJLQSRVLWLRQDWVKLSPHQW
5HWXUQWRRULJLQ
GLUHFWLRQ
3OXVVLGH
0LQXVVLGH