Managed Switch CLI Manual, Release 8.0
Switching Commands
3-129
v1.0, July 2009
Example: The following shows example CLI display output for the command.
(switch) #show ip verify source
Interface Filter Type IP Address MAC Address Vlan
--------- ----------- --------------- ----------------- -----
0/1 ip-mac 210.1.1.3 00:02:B3:06:60:80 10
0/1 ip-mac 210.1.1.4 00:0F:FE:00:13:04 10
show ip source binding
Use this command to display the IPSG bindings.
Filter Type
Is one of two values:
• ip-mac: User has configured MAC address filtering on this interface.
• ip: Only IP address filtering on this interface.
IP Address
IP address of the interface
MAC Address
If MAC address filtering is not configured on the interface, the MAC Address field is
empty. If port security is disabled on the interface, then the MAC Address field displays
“permit-all.”
VLAN
The VLAN for the binding rule.
Format
show ip source binding [{static/dynamic}] [interface
unit/slot/port
]
[
vlan id
]
Mode
• Privileged EXEC
• User EXEC
Term
Definition
MAC Address
The MAC address for the entry that is added.
IP Address
The IP address of the entry that is added.
Type
Entry type; statically configured from CLI or dynamically learned from DHCP Snooping.
VLAN
VLAN for the entry.
Interface
IP address of the interface in unit/slot/port format.
Term
Definition
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
