Managed Switch CLI Manual, Release 8.0
Utility Commands
6-35
v1.0, July 2009
sntp unicast client poll-interval
This command sets the poll interval for SNTP unicast clients in seconds as a power of two where
<poll-interval>
can be a value from 6 to 10.
no sntp unicast client poll-interval
This command resets the poll interval for SNTP unicast clients to its default value.
sntp unicast client poll-timeout
This command will set the poll timeout for SNTP unicast clients in seconds to a value from 1-30.
no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value.
sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10.
Default
6
Format
sntp unicast client poll-interval <poll-interval>
Mode
Global Config
Format
no sntp unicast client poll-interval
Mode
Global Config
Default
5
Format
sntp unicast client poll-timeout <poll-timeout>
Mode
Global Config
Format
no sntp unicast client poll-timeout
Mode
Global Config
Default
1
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
