Managed Switch CLI Manual, Release 8.0
Switching Commands
3-40
v1.0, July 2009
vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The vlan-list contains VlanId's in range <1-4093>. Separate non-
consecutive IDs with ',' and no spaces and no zeros in between the range; Use '-' for range.
no vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The vlan-list contains VlanId's in
range <1-4093>. Separate non-consecutive IDs with ',' and no spaces and no zeros in between the
range; Use '-' for range.
vlan association subnet
This command associates a VLAN to a specific IP-subnet.
no vlan association subnet
This command removes association of a specific IP-subnet to a VLAN.
Format
vlan tagging
<vlan-list>
Mode
Interface Config
Format
no vlan tagging
<vlan-list>
Mode
Interface Config
Format
vlan association subnet
<ipaddr> <netmask> <1-4093>
Mode
VLAN Config
Format
no vlan association subnet
<ipaddr> <netmask>
Mode
VLAN Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
