Managed Switch CLI Manual, Release 8.0
Management Commands
7-39
v1.0, July 2009
no aaa authentication enable
Use this command to remove the authentication method.
aaa authentication dot1x
This command is used to set authentication for dot1x users. The method argument identifies the
list of methods that the authentication algorithm tries, in the given sequence. The additional
methods of authentication are used only if the previous method returns an error, not if it fails. To
ensure that the authentication succeeds even if all methods return an error, specify
none
as the
final method in the command line. For example if
none
is specified as an authentication method
after radius, no authentication is used if the radius server is down.
line
Uses the line password for authentication.
none
Uses no authentication.
radius
Uses the list of all RADIUS servers for authentication. Uses username
"$enabx$."where x is the privilege level.
tacacs
Uses the list of all TACACS servers for authentication. Uses username "$enabx$."
where x is the privilege level.
Note:
If the default list is not set, only the enable password is checked. This has the same
effect as the following command:
aaa authentication enable default enable
On the console, the enable password is used if it exists. If no password is set, the
process will succeed anyway. This has the same effect as the following command:
aaa authentication enable default enable none
Format
no aaa authentication enable {default |
list-name
}
method1
[m
ethod2
...]
Mode
Global Config
Format
aaa authentication dot1x default
method1
[
method2
...]
Mode
Global Config
Keyword
Description
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
