Managed Switch CLI Manual, Release 8.0
Management Commands
7-40
v1.0, July 2009
method1 [method2…]
At least one from the following table:
no aaa authentication dot1x
This command is used to remove the authentication at login.
write memory
Use this command to save running configuration changes to NVRAM so that the changes you
make will persist across a reboot. This command is the same as
copy system:running
config nvram:startup-config
.
SNMP Commands
This section describes the commands you use to configure Simple Network Management Protocol
(SNMP) on the switch. You can configure the switch to act as an SNMP agent so that it can
communicate with SNMP managers on your network.
Keyword
Description
local
Uses the local username database for authentication.
none
Uses no authentication.
radius
Uses the list of all RADIUS servers for authentication.
Format
no aaa authentication dot1x default
Mode
Global Config
Format
write memory
Mode
Privileged EXEC
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
