Managed Switch CLI Manual, Release 8.0
Switching Commands
3-91
v1.0, July 2009
addport
This command adds one port to the port-channel (LAG). The interface is a logical unit/slot/port
number or a group ID of a configured port-channel.
deleteport (Interface Config)
This command deletes the port from the port-channel (LAG). The interface is a logical unit/slot/
port number or a group ID of a configured port-channel.
deleteport (Global Config)
This command deletes all configured ports from the port-channel (LAG). The interface is a logical
unit/slot/port number of a configured port-channel. To clear the port channels, see
“clear port-
channel” on page 6-27
.
Note:
Before adding a port to a port-channel, set the physical mode of the port. For more
information, see
“speed” on page 3-7
Format
addport
{<logical unit/slot/port>|<lag-group-id>}
Mode
Interface Config
Format
deleteport
{<logical unit/slot/port>|<lag-group-id>}
Mode
Interface Config
Format
deleteport
<logical unit/slot/port> all
Mode
Global Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
