Managed Switch CLI Manual, Release 8.0
Utility Commands
6-44
v1.0, July 2009
network (DHCP Pool Config)
Use this command to configure the subnet number and mask for a DHCP address pool on the
server. Network-number is a valid IP address, made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid. Mask is the IP subnet mask for the specified address pool. The
prefix-length is an integer from 0 to 32.
no network
This command removes the subnet number and mask.
bootfile
The command specifies the name of the default boot image for a DHCP client. The
<filename>
specifies the boot image file.
no bootfile
This command deletes the boot image name.
Default
none
Format
network <networknumber> [{<mask> | <prefixlength>}]
Mode
DHCP Pool Config
Format
no network
Mode
DHCP Pool Config
Format
bootfile <filename>
Mode
DHCP Pool Config
Format
no bootfile
Mode
DHCP Pool Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
