Managed Switch CLI Manual, Release 8.0
Utility Commands
6-50
v1.0, July 2009
no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database. If “*” is
specified, the bindings corresponding to all the addresses are deleted.
<address>
is a valid IP
address made up of four decimal bytes ranging from 0 to 255. IP address
0.0.0.0
is invalid.
clear ip dhcp server statistics
This command clears DHCP server statistics counters.
clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The server
detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is used
as the address parameter.
Format
no ip dhcp conflict logging
Mode
Global Config
Format
clear ip dhcp binding {<address> | *}
Mode
Privileged EXEC
Format
clear ip dhcp server statistics
Mode
Privileged EXEC
Default
none
Format
clear ip dhcp conflict {<address> | *}
Mode
Privileged EXEC
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
