Managed Switch CLI Manual, Release 8.0
Management Commands
7-31
v1.0, July 2009
no username snmpv3 accessmode
This command sets the snmpv3 access privileges for the specified user as
readwrite
for the
“admin” user and
readonly
for all other users. The
<username>
value is the user name for
which the specified access mode will apply.
username snmpv3 authentication
This command specifies the authentication protocol to be used for the specified user. The valid
authentication protocols are
none
,
md5
or
sha
. If you specify
md5
or
sha
, the login password is
also used as the snmpv3 authentication password and therefore must be at least eight characters in
length. The
<username>
is the user name associated with the authentication protocol. You must
enter the
<username>
in the same case you used when you added the user. To see the case of the
<username>
, enter the
show users
command.
no username snmpv3 authentication
This command sets the authentication protocol to be used for the specified user to
none
. The
<username>
is the user name for which the specified authentication protocol is used.
Format
username snmpv3 accessmode
<username> {readonly | readwrite}
Mode
Global Config
Format
no username snmpv3 accessmode
<username>
Mode
Global Config
Default
no authentication
Format
username snmpv3 authentication
<username> {none | md5 | sha}
Mode
Global Config
Format
no username snmpv3 authentication
<username>
Mode
Global Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
