Managed Switch CLI Manual, Release 8.0
Stacking Commands
2-4
v1.0, July 2009
slot
This command configures a slot in the system. The
<unit/slot>
is the slot identifier of the
slot. The
<
cardindex
>
is the index into the database of the supported card types, indicating the
type of the card being preconfigured in the specified slot. The card index is a 32-bit integer. If a
card is currently present in the slot that is unconfigured, the configured information will be deleted
and the slot will be re-configured with default information for the card.
no slot
This command removes configured information from an existing slot in the system.
set slot disable
This command configures the administrative mode of the slot(s). If you specify
[all]
, the
command is applied to all slots, otherwise the command is applied to the slot identified by
<unit/slot>
.
Format
slot
<unit/slot> <cardindex>
Mode
Global Config
Note:
Card index can be obtained by executing show supported cardtype command in
User EXEC mode.
Format
no slot
<unit/slot> <cardindex>
Mode
Global Config
Note:
Card index can be obtained by executing show supported cardtype command in
User EXEC mode.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
