Managed Switch CLI Manual, Release 8.0
Switching Commands
3-113
v1.0, July 2009
no monitor
This command removes all the source ports and a destination port for the and restores the default
value for mirroring session mode for all the configured sessions.
show monitor session
This command displays the Port monitoring information for a particular mirroring session.
Format
no monitor session
<session-id> [{source interface <unit/slot/port>
| destination interface <unit/slot/port> | mode}]
Mode
Global Config
Note:
This is a stand-alone “no” command. This command does not have a “normal”
form.
Default
enabled
Format
no monitor
Mode
Global Config
Note:
The
<session-id>
parameter is an integer value used to identify the session.
In the current version of the software, the
<session-id>
parameter is always
one (1)
Format
show monitor session
<session-id>
Mode
Privileged EXEC
Term
Definition
Session ID
An integer value used to identify the session. Its value can be anything between 1 and
the maximum number of mirroring sessions allowed on the platform.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
