Managed Switch CLI Manual, Release 8.0
Routing Commands
4-23
v1.0, July 2009
ip irdp preference
This command configures the preferability of the address as a default router address, relative to
other router addresses on the same subnet.
no ip irdp preference
This command configures the default preferability of the address as a default router address,
relative to other router addresses on the same subnet.
show ip irdp
This command displays the router discovery information for all interfaces, or a specified interface.
Default
0
Format
ip irdp preference <-2147483648 to 2147483647>
Mode
Interface Config
Format
no ip irdp preference
Mode
Interface Config
Format
show ip irdp {<unit/slot/port> | all}
Modes
• Privileged EXEC
• User EXEC
Term
Definition
Interface
The <
unit/slot/port>
that matches the rest of the information in the row.
Ad Mode
The advertise mode, which indicates whether router discovery is enabled or disabled on
this interface.
Advertise
Address
The IP address to which the interface sends the advertisement.
Max Int
The maximum advertise interval, which is the maximum time, in seconds, allowed
between sending router advertisements from the interface.
Min Int
The minimum advertise interval, which is the minimum time, in seconds, allowed between
sending router advertisements from the interface.
Hold Time
The amount of time, in seconds, that a system should keep the router advertisement
before discarding it.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
