Managed Switch CLI Manual, Release 8.0
Using the Command-Line Interface
1-2
v1.0, July 2009
•
network parms
is the command name.
•
<ipaddr>
and
<netmask>
are parameters and represent required values that you must
enter after you type the command keywords.
•
[gateway]
is an optional parameter, so you are not required to enter a value in place of the parameter.
The
CLI Command Reference
lists each command by the command name and provides a brief
description of the command. Each command reference also contains the following information:
•
Format shows the command keywords and the required and optional parameters.
•
Mode identifies the command mode you must be in to access the command.
•
Default shows the default value, if any, of a configurable setting on the device.
The
show
commands also contain a description of the information that the command shows.
Command Conventions
In this document, the command name is in
bold
font. Parameters are in
italic font
. You
must replace the parameter name with an appropriate value, which might be a name or number.
Parameters are order dependent.
The parameters for a command might include mandatory values, optional values, or keyword
choices.
Table 1
describes the conventions this document uses to distinguish between value types.
Table 1. Parameter Conventions
Symbol
Example
Description
<> angle brackets
<value>
Indicates that you must enter a value in place of the
brackets and text inside them.
[] square brackets
[value]
Indicates an optional parameter that you can enter in
place of the brackets and text inside them.
{} curly braces
{choice1 |
choice2}
Indicates that you must select a parameter from the list of
choices.
| Vertical bars
choice1 | choice2
Separates the mutually exclusive choices.
[{}] Braces within
square brackets
[{choice1 |
choice2}]
Indicates a choice within an optional element.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
