Managed Switch CLI Manual, Release 8.0
Switching Commands
3-66
v1.0, July 2009
dot1x port-control
This command sets the authentication mode to use on the specified port. Select
force-
unauthorized
to specify that the authenticator PAE unconditionally sets the controlled port to
unauthorized. Select
force-authorized
to specify that the authenticator PAE unconditionally
sets the controlled port to authorized. Select
auto
to specify that the authenticator PAE sets the
controlled port mode to reflect the outcome of the authentication exchanges between the
supplicant, authenticator and the authentication server. If the
mac-based
option is specified, then
MAC-based dot1x authentication is enabled on the port.
no dot1x port-control
This command sets the 802.1x port control mode on the specified port to the default value.
dot1x port-control all
This command sets the authentication mode to use on all ports. Select
force-unauthorized
to specify that the authenticator PAE unconditionally sets the controlled port to unauthorized.
Select
force-authorized
to specify that the authenticator PAE unconditionally sets the
controlled port to authorized. Select
auto
to specify that the authenticator PAE sets the controlled
port mode to reflect the outcome of the authentication exchanges between the supplicant,
authenticator and the authentication server. If the
mac-based
option is specified, then MAC-
based dot1x authentication is enabled on the port.
Default
auto
Format
dot1x port-control
{force-unauthorized | force-authorized | auto |
mac-based}
Mode
Interface Config
Format
no dot1x port-control
Mode
Interface Config
Default
auto
Format
dot1x port-control all
{force-unauthorized | force-authorized | auto
| mac-based}
Mode
Global Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
