Managed Switch CLI Manual, Release 8.0
Switching Commands
3-63
v1.0, July 2009
show mac-address-table gmrp
This command displays the GMRP entries in the Multicast Forwarding Database (MFDB) table.
Port-Based Network Access Control Commands
This section describes the commands you use to configure port-based network access control
(802.1x). Port-based network access control allows you to permit access to network services only
to and devices that are authorized and authenticated.
clear dot1x statistics
This command resets the 802.1x statistics for the specified port or for all ports.
clear radius statistics
This command is used to clear all RADIUS statistics.
Format
show mac-address-table gmrp
Mode
Privileged EXEC
Term
Definition
Mac Address
A unicast MAC address for which the switch has forwarding and or filtering information.
The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for
example 01:23:45:67:89:AB. In an IVL system the MAC address is displayed as 8 bytes.
Type
The type of the entry. Static entries are those that are configured by the end user.
Dynamic entries are added to the table as a result of a learning process or protocol.
Description
The text description of this multicast table entry.
Interfaces
The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
Format
clear dot1x statistics
{<unit/slot/port> | all}
Mode
Privileged EXEC
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
