Managed Switch CLI Manual, Release 8.0
Switching Commands
3-172
v1.0, July 2009
no lldp med transmit-tlv
Use this command to remove a TLV.
show lldp med
Use this command to display a summary of the current LLDP MED configuration.
Example: The following shows example CLI display output for the command.
(switch) #show lldp med
LLDP MED Global Configuration
Fast Start Repeat Count: 3
Device Class: Network Connectivity
(switch) #
Format
no lldp med transmit-tlv all
[capabilities] [network-policy] [ex-pse]
[ex-pd] [location] [inventory]
Mode
Global Config
Format
show lldp med
Mode
Privileged Exec
Term
Definition
Fast Start
Repeat Count
The number of LLDP PDUs that will be transmitted when the protocl is enabled.
Device Class
The local device’s MED Classification. There are four different kinds of devices, three of
them represent the actual end points (classified as Class I Generic[IP Communication
Controller etc.], Class II Media Conference Bridge etc.], Class III Communication [IP
Telephone etc.]. Class IV Network Connectivity Device, which is typically a LAN Switch,
Router, IEEE 802.11 Wireless Access Point, etc.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
