Managed Switch CLI Manual, Release 8.0
Log Messages
8-16
v1.0, July 2009
QoS
Table 8-33: Protocol-based VLANs Log Messages
Component
Message
Cause
Protocol Based
VLANs
pbVlanCnfgrInitPhase2Process: Unable to
register NIM callback
Appears when nimRegisterIntfChange fails
to register pbVlan for link state changes.
Protocol Based
VLANs
pbVlanCnfgrInitPhase2Process: Unable to
register pbVlan callback with vlans
Appears when vlanRegisterForChange fails
to register pbVlan for vlan changes.
Protocol Based
VLANs
pbVlanCnfgrInitPhase2Process: Unable to
register pbVlan callback with nvStore
Appears when nvStoreRegister fails to
register save and restore functions for
configuration save.
Table 8-34: ACL Log Messages
Component
Message
Cause
ACL
Total number of ACL rules (x) exceeds max
(y) on intf i.
The combination of all ACLs applied to an
interface has resulted in requiring more rules
than the platform supports.
ACL
ACL
name
, rule
x
: This rule is not being
logged
The ACL configuration has resulted in a
requirement for more logging rules than the
platform supports. The specified rule is
functioning normally except for the logging
action.
ACL
aclLogTask: error logging ACL rule trap for
correlator
number
The system was unable to send an SNMP
trap for this ACL rule which contains a
logging attribute.
ACL
IP ACL
number
: Forced truncation of one or
more rules during config migration
While processing the saved configuration,
the system encountered an ACL with more
rules than is supported by the current
version. This may happen when code is
updated to a version supporting fewer rules
per ACL than the previous version.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
