Managed Switch CLI Manual, Release 8.0
Utility Commands
6-41
v1.0, July 2009
client-name
This command specifies the name for a DHCP client. Name is a string consisting of standard
ASCII characters.
no client-name
This command removes the client name.
default-router
This command specifies the default router list for a DHCP client. {
address1, address2…
address8
} are valid IP addresses, each made up of four decimal bytes ranging from 0 to 255. IP
address 0.0.0.0 is invalid.
no default-router
This command removes the default router list.
Default
none
Format
client-name <name>
Mode
DHCP Pool Config
Format
no client-name
Mode
DHCP Pool Config
Default
none
Format
default-router <address1> [<address2>....<address8>]
Mode
DHCP Pool Config
Format
no default-router
Mode
DHCP Pool Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
