Managed Switch CLI Manual, Release 8.0
Captive Portal Commands
9-22
v1.0, July 2009
Example
(switch)
#show captive-portal interface client status
Client Client
Intf
Intf Description
MAC Address
IP Address
------ ----------------------------------- ----------------- -
--------------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit 0002.BC00.1290 10.254.96.47
1/0/2 Unit: 1 Slot: 0 Port: 2 Gigabit 0002.BC00.1292 10.254.96.49
1/0/3 Unit: 1 Slot: 0 Port: 3 Gigabit 0002.BC00.1293 10.254.96.50
(switch)
#show captive-portal interface 1/0/1 client status
Interface................................. 1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit
Client Client
MAC Address IP Address CP ID CP Name Protocol Verification
----------------- --------------- ----- -------------- ------
-- ------------
0002.BC00.1290 10.254.96.47 1
cp1
http
local
0002.BC00.1291 10.254.96.48 2
cp2
http
local
show captive-portal configuration client status
Use this command to display the clients authenticated to all captive portal configurations or a to
specific configuration.
<1-10>
is the captive portal ID
.
Verification
The user verification mode
Format
show captive-portal configuration [ <
1-10
> ] client status
Mode
Privileged EXEC mode
Term
Definition
CP ID
The captive portal ID
CP Name
The captive portal name
Client MAC
Address
The MAC address of the client associated with the captive portal instance.
Client IP Address
The IP address of the client associated with the captive portal instance
Interface
The interface on which the client is authenticated.
Term
Definition
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
