Managed Switch CLI Manual, Release 8.0
Utility Commands
6-67
v1.0, July 2009
no debug igmpsnooping receive
This command disables tracing of received IGMP Snooping packets.
debug ip acl
Use this command to enable debug of IP Protocol packets matching the ACL criteria.
no debug ip acl
Use this command to disable debug of IP Protocol packets matching the ACL criteria.
debug ip dvmrp packet
Use this command to trace DVMRP packet reception and transmission.
receive
traces only
received DVMRP packets and
transmit
traces only transmitted DVMRP packets. When neither
keyword is used in the command, then all DVMRP packet traces are dumped. Vital information
such as source address, destination address, control packet type, packet length, and the interface on
which the packet is received or transmitted is displayed on the console
Group
Multicast group address in the IGMP header.
Format
no debug igmpsnooping receive
Mode
Privileged EXEC
Default
disabled
Format
debug ip acl
<acl Number>
Mode
Privileged EXEC
Format
no debug ip acl <
acl Number
>
Mode
Privileged EXEC
Default
disabled
Format
debug ip dvmrp packet [receive|transmit]
Mode
Privileged EXEC
Parameter
Definition
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
