Managed Switch CLI Manual, Release 8.0
Switching Commands
3-197
v1.0, July 2009
show isdp entry
This command displays ISDP entries. If the device id is specified, then only entries for that device
are shown.
show isdp neighbors
This command displays the list of neighboring devices.
Format
show isdp entry {all | deviceid}
Mode
Privileged EXEC
Term
Definition
Device ID
The device ID associated with the neighbor which advertised the information.
IP Addresses
The IP address(es) associated with the neighbor.
Platform
The hardware platform advertised by the neighbor.
Interface
The interface (slot/port) on which the neighbor's advertisement was received.
Port ID
The port ID of the interface from which the neighbor sent the advertisement.
Hold Time
The hold time advertised by the neighbor.
Version
The software version that the neighbor is running.
Advertisement
Version
The version of the advertisement packet received from the neighbor.
Capability
ISDP Functional Capabilities advertised by the neighbor.
Format
show isdp neighbors [ {<unit/slot/port> | detail} ]
Mode
Privileged EXEC
Term
Definition
Device ID
The device ID associated with the neighbor which advertised the information.
IP Addresses
The IP addresses associated with the neighbor.
Capability
ISDP functional capabilities advertised by the neighbor.
Platform
The hardware platform advertised by the neighbor.
Interface
The interface (unit/slot/port) on which the neighbor's advertisement was received.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
