Managed Switch CLI Manual, Release 8.0
Quality of Service (QoS) Commands
5-36
v1.0, July 2009
no mac access-group
This command removes a MAC ACL identified by
<name>
from the interface in a given
direction.
show mac access-lists
This command displays a MAC access list and all of the rules that are defined for the MAC ACL.
Use the
[name]
parameter to identify a specific MAC ACL to display.
Format
mac access-group <name> [vlan <vlan-id>] [in|out] [sequence <1-
4294967295>]
Modes
• Global Config
• Interface Config
Format
no mac access-group <name> [vlan <vlan-id>] in
Modes
• Global Config
• Interface Config
Format
show mac access-lists [name]
Mode
Privileged EXEC
Term
Definition
Rule Number
The ordered rule number identifier defined within the MAC ACL.
Action
The action associated with each rule. The possible values are Permit or Deny.
Source MAC
Address
The source MAC address for this rule.
Destination MAC
Address
The destination MAC address for this rule.
Ethertype
The Ethertype keyword or custom value for this rule.
VLAN ID
The VLAN identifier value or range for this rule.
COS
The COS (802.1p) value for this rule.
Log
Displays when you enable logging for the rule.
Assign Queue
The queue identifier to which packets matching this rule are assigned.
Mirror Interface
The unit/slot/port to which packets matching this rule are copied.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
