Managed Switch CLI Manual, Release 8.0
Utility Commands
6-22
v1.0, July 2009
show logging hosts
This command displays all configured logging hosts. The
<unit>
is the switch identifier and has
a range of 1-8.
show logging traplogs
This command displays SNMP trap events and statistics.
Term
Definition
Buffered (In-
Memory)
Logging
Shows whether the In-Memory log is enabled or disabled.
Buffered
Logging
Wrapping
Behavior
The behavior of the In Memory log when faced with a log full situation.
Buffered Log
Count
The count of valid entries in the buffered log.
Format
show logging hosts <unit>
Mode
Privileged EXEC
Term
Definition
Host Index
(Used for deleting hosts.)
IP Address /
Hostname
IP address or hostname of the logging host.
Severity Level
The minimum severity to log to the specified address. The possible values are emergency
(0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7).
Port
The server port number, which is the port on the local host from which syslog messages
are sent.
Host Status
The state of logging to configured syslog hosts. If the status is disable, no logging occurs.
Format
show logging traplogs
Mode
Privileged EXEC
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
