Managed Switch CLI Manual, Release 8.0
Switching Commands
3-59
v1.0, July 2009
set gvrp interfacemode
This command enables GVRP on a single port (Interface Config mode) or all ports (Global Config
mode).
no set gvrp interfacemode
This command disables GVRP on a single port (Interface Config mode) or all ports (Global Config
mode). If GVRP is disabled, Join Time, Leave Time and Leave All Time have no effect.
show gvrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or
all interfaces.
Format
no set gvrp adminmode
Mode
Privileged EXEC
Default
disabled
Format
set gvrp interfacemode
Mode
• Interface Config
• Global Config
Format
no set gvrp interfacemode
Mode
• Interface Config
• Global Config
Format
show gvrp configuration
{<unit/slot/port> | all}
Mode
• Privileged EXEC
• User EXEC
Term
Definition
Interface
Valid unit, slot, and port number separated by forward slashes.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
