Managed Switch CLI Manual, Release 8.0
Quality of Service (QoS) Commands
5-17
v1.0, July 2009
match protocol
This command adds to the specified class definition a match condition based on the value of the IP
Protocol field in a packet using a single keyword notation or a numeric value notation.
To specify the match condition using a single keyword notation, the value for
<protocol-
name
>
is one of the supported protocol name keywords. The currently supported values are:
icmp
,
igmp
,
ip
,
tcp
,
udp
. A value of
ip
matches all protocol number values.
To specify the match condition using a numeric value notation, the protocol number is a standard
value assigned by IANA and is interpreted as an integer from 0 to 255.
Note:
This “free form” version of the IP DSCP/Precedence/TOS match specification
gives the user complete control when specifying which bits of the IP Service Type
field are checked.
Default
none
Format
match ip tos <tosbits> <tosmask>
Mode
Class-Map Config
Note:
This command does not validate the protocol number value against the current list
defined by IANA.
Default
none
Format
match protocol {<protocol-name> | <0-255>}
Mode
Class-Map Config
Ipv6-Class-Map Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
