Managed Switch CLI Manual, Release 8.0
Utility Commands
6-51
v1.0, July 2009
show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Format
show ip dhcp binding [<address>]
Modes
• Privileged EXEC
• User EXEC
Term
Definition
IP address
The IP address of the client.
Hardware
Address
The MAC Address or the client identifier.
Lease expiration
The lease expiration time of the IP address assigned to the client.
Type
The manner in which IP address was assigned to the client.
Format
show ip dhcp global configuration
Modes
• Privileged EXEC
• User EXEC
Term
Definition
Service DHCP
The field to display the status of dhcp protocol.
Number of Ping
Packets
The maximum number of Ping Packets that will be sent to verify that an ip address id not
already assigned.
Conflict Logging
Shows whether conflict logging is enabled or disabled.
BootP Automatic
Shows whether BootP for dynamic pools is enabled or disabled.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
