Managed Switch CLI Manual, Release 8.0
Management Commands
7-13
v1.0, July 2009
no transport output telnet
Use this command to prevent new outbound Telnet connection from being established.
session-limit
This command specifies the maximum number of simultaneous outbound Telnet sessions. A value
of 0 indicates that no outbound Telnet session can be established.
no session-limit
This command sets the maximum number of simultaneous outbound Telnet sessions to the default
value.
session-timeout
This command sets the Telnet session timeout value.The timeout value unit of time is minutes.
Format
no transport output telnet
Mode
Line Config
Default
5
Format
session-limit
<0-5>
Mode
Line Config
Format
no session-limit
Mode
Line Config
Default
5
Format
session-timeout
<1-160>
Mode
Line Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
