Managed Switch CLI Manual, Release 8.0
Utility Commands
6-33
v1.0, July 2009
Simple Network Time Protocol (SNTP) Commands
This section describes the commands you use to automatically configure the system time and date
by using SNTP.
sntp broadcast client poll-interval
This command sets the poll interval for SNTP broadcast clients in seconds as a power of two
where
<poll-interval>
can be a value from 6 to 10.
no sntp broadcast client poll-interval
This command resets the poll interval for SNTP broadcast client back to the default value.
<url>
{image1 | image2}
Download an image from the remote server to either
image. In a stacking environment, the downloaded
image is distributed to the stack nodes.
{image1 | image2}
<url>
Upload either image to the remote server.
image1
image2
Copy
image1
to
image2
.
image2
image1
Copy
image2
to
image1
.
{image1 | image2}
unit://<unit>/{image1 |
image2}
Copy an image from the management node to a given
node in a Stack. Use the unit parameter to specify the
node to which the image should be copied.
{image1 | image2}
unit://*/{image1 | image2} Copy an image from the management node to all of the
nodes in a Stack.
Default
6
Format
sntp broadcast client poll-interval <poll-interval>
Mode
Global Config
Format
no sntp broadcast client poll-interval
Mode
Global Config
Source
Destination
Description
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
