Managed Switch CLI Manual, Release 8.0
Switching Commands
3-115
v1.0, July 2009
•
Multicast MAC and source ports and destination ports (max=20)
no macfilter
This command removes all filtering restrictions and the static MAC filter entry for the MAC
address
<macaddr>
on the VLAN
<vlanid>
. The
<macaddr>
parameter must be specified
as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
parameter must identify a valid VLAN.
macfilter adddest
Use this command to add the interface to the destination filter set for the MAC filter with the given
<macaddr>
and VLAN of
<vlanid>
. The
<macaddr>
parameter must be specified as a 6-
byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
<vlanid>
parameter must
identify a valid VLAN.
Format
macfilter
<macaddr> <vlanid>
Mode
Global Config
Format
no macfilter
<macaddr> <vlanid>
Mode
Global Config
Note:
Configuring a destination port list is only valid for multicast MAC addresses.
Format
macfilter adddest <
macaddr
> <vlanid>
Mode
Interface Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
