Managed Switch CLI Manual, Release 8.0
Utility Commands
6-46
v1.0, July 2009
netbios-node-type
The command configures the NetBIOS node type for Microsoft Dynamic Host Configuration
Protocol (DHCP) clients.type Specifies the NetBIOS node type. Valid types are:
•
b-node—Broadcast
•
p-node—Peer-to-peer
•
m-node—Mixed
•
h-node—Hybrid (recommended)
no netbios-node-type
This command removes the NetBIOS node Type.
next-server
This command configures the next server in the boot process of a DHCP client.The
<address>
parameter is the IP address of the next server in the boot process, which is typically a TFTP server.
no next-server
This command removes the boot server list.
Default
none
Format
netbios-node-type <type>
Mode
DHCP Pool Config
Format
no netbios-node-type
Mode
DHCP Pool Config
Default
inbound interface helper addresses
Format
next-server <address>
Mode
DHCP Pool Config
Format
no next-server
Mode
DHCP Pool Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
