Managed Switch CLI Manual, Release 8.0
Switching Commands
3-46
v1.0, July 2009
mode dvlan-tunnel
Use this command to enable Double VLAN Tunneling on the specified interface.
no mode dvlan-tunnel
This command is used to disable Double VLAN Tunneling on the specified interface. By default,
Double VLAN Tunneling is disabled.
show dot1q-tunnel
Use this command without the optional parameters to display all interfaces enabled for Double
VLAN Tunneling. Use the optional parameters to display detailed information about Double
VLAN Tunneling for the specified interface or all interfaces.
Note:
When you use the
mode dvlan-tunnel
command on an interface, it becomes
a service provider port. Ports that do not have double VLAN tunneling enabled are
customer ports.
Default
disabled
Format
mode dvlan-tunnel
Mode
Interface Config
Format
no mode dvlan-tunnel
Mode
Interface Config
Format
show dot1q-tunnel
[interface {<unit/slot/port> | all}]
Mode
• Privileged EXEC
• User EXEC
Term
Definition
Interface
Valid unit, slot, and port number separated by forward slashes.
Mode
The administrative mode through which Double VLAN Tunneling can be enabled or
disabled. The default value for this field is disabled.
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
