Managed Switch CLI Manual, Release 8.0
Captive Portal Commands
9-21
v1.0, July 2009
Example
(switch)#show captive-portal client 0102.0304.0506 statistics
Client MAC Address........................ 0002.bc00.1290
Bytes Received............................ 0
Bytes Transmitted......................... 0
Packets Received.......................... 0
Packets Transmitted....................... 0
show captive-portal interface client status
Use this command to display information about clients authenticated on all interfaces or a specific
interface
If the interface is specified, the following terms are displayed.
Term
Definition
Client MAC
address
The MAC address of the authenticated client
Bytes Received
The number of bytes received from the client
Bytes Transmitted
The number of bytes transmitted to the client
Packets Received
The number of packets received from the client
Packets
Transmitted
The number of packets transmitted from the client
Format
show captive-portal interface [
<unit/slot/port>]
client status
Mode
Privileged EXEC mode
Term
Definition
Client Intf
Interface on which the clients are authenticated.
Client Intf
Descripiton
The interface description
MAC Address
The MAC address of the authenticated user.
IP Address
The IP address of the authenticated user.
Term
Definition
CP ID
The ID of the captive portal associated with the client
CP Name
The name of the captive portal associated with the client
Protocol
The protocol the client is using
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
