Managed Switch CLI Manual, Release 8.0
Management Commands
7-18
v1.0, July 2009
no sshcon maxsessions
This command sets the maximum number of allowed SSH connection sessions to the default
value.
sshcon timeout
This command sets the SSH connection session timeout value, in minutes. A session is active as
long as the session has been idle for the value set. The time is a decimal value from 1 to 160.
Changing the timeout value for active sessions does not become effective until the session is re
accessed. Also, any keystroke activates the new timeout duration.
no sshcon timeout
This command sets the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session is re
accessed. Also, any keystroke activates the new timeout duration.
show ip ssh
This command displays the ssh settings.
Format
no sshcon maxsessions
Mode
Privileged EXEC
Default
5
Format
sshcon timeout
<1-160>
Mode
Privileged EXEC
Format
no sshcon timeout
Mode
Privileged EXEC
Format
show ip ssh
Mode
Privileged EXEC
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
