Managed Switch CLI Manual, Release 8.0
Switching Commands
3-196
v1.0, July 2009
show isdp interface
This command displays ISDP settings for the specified interface.
Term
Definition
Timer
The frequency with which this device sends ISDP packets. This value is given in
seconds.
Hold Time
The length of time the receiving device should save information sent by this device. This
value is given in seconds.
Version 2
Advertisements
The setting for sending ISDPv2 packets. If disabled, version 1 packets are transmitted.
Device ID
The Device ID advertised by this device. The format of this Device ID is characterized by
the value of the Device ID Format object.
Device ID
Format
Capability
Indicates the Device ID format capability of the device.
•
serialNumber
indicates that the device uses a serial number as the format for its
Device ID.
•
macAddress
indicates that the device uses a Layer 2 MAC address as the format for
its Device ID.
•
other
indicates that the device uses its platform-specific format as the format for its
Device ID.
Device ID
Format
Indicates the Device ID format of the device.
•
serialNumber
indicates that the value is in the form of an ASCII string containing the
device serial number.
•
macAddress
indicates that the value is in the form of a Layer 2 MAC address.
•
other
indicates that the value is in the form of a platform specific ASCII string
containing info that identifies the device. For example, ASCII string contains
serialNumber appended/prepended with system name.
Format
show isdp interface {all | <unit/slot/port>}
Mode
Privileged EXEC
Term
Definition
Mode
ISDP mode enabled/disabled status for the interface(s).
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...