Managed Switch CLI Manual, Release 8.0
Management Commands
7-58
v1.0, July 2009
radius server retransmit
This command configures the global parameter for the RADIUS client that specifies the number of
transmissions of the messages to be made before attempting the fall back server upon unsuccessful
communication with the current RADIUS authenticating server. When the maximum number of
retries are exhausted for the RADIUS accounting server and no response is received, the client
does not communicate with any other server.
no radius server retransmit
The no version of this command sets the value of this global parameter to the default value.
radius server timeout
This command configures the global parameter for the RADIUS client that specifies the timeout
value (in seconds) after which a request must be retransmitted to the RADIUS server if no
response is received. The timeout value is an integer in the range of 1 to 30.
Field
Description
ip addr
The IP address of the RADIUS Authenticating server.
dnsname
The DNS name of the server.
Default
4
Format
radius server retransmit
<retries>
Mode
Global Config
Field
Description
retries
The maximum number of transmission attempts in the range of 1 to 15.
Format
no radius server retransmit
Mode
Global Config
Summary of Contents for FSM726v3 - ProSafe Fast Ethernet L2 Managed Switch
Page 4: ...v1 0 July 2009 iv...
